Ever just get the urge to shoot marshmallow's at things. You may not have but your kid probably has. I present to you the idea a marshmallow shooter. The best thing is I'm gonna tell you exactly how to make one. Followed by a video that's gonna show you how to make a better one. Let's get started shall we.
Materials
- A 10ft 1/2 inch PVC Pipe
- A Saw doesn't really matter what kind
- Measuring Tape
- Two 90 Degree Elbows(smooth)
- Two T's
- Two Caps
- A Marker(to mark off measurements)
- Sandpaper
Making The Marshmallow Shooter
_____________________________
Step #1: Make four 3in pieces so take you measuring tape out hook it at the beginning of you 10ft PVC and make a mark at every 3in, 3|6|9|12|.
Step #2: Now it's time for you to cut and sand down the burs around the edge and the inside of your pipes.
Step #3: On to the measuring and cutting two 5in pieces take you measuring tape out hook it at the beginning of you 10ft PVC and make a mark at every 5in, 5|10|. After you've done that, Just repeat step #2.
Step #4: Make one 7in cut and repeat step #2.
Step #5: Layout all you materials you should have four 3in two 5in and last but not least one 7in.
Step #6: Now it's time for the two 90 degree elbows, the two T's and two caps. Your gonna use them to connect all the pieces, like in the sloppy diagram below. It's the best I could lol.
And that's the tutorial hope it helped. Have fun shooting marshmallow's.
0 comments:
Post a Comment